A Gateway to Training and Resources for Finite Element Analysis

Yoke model

This model is used for a variety of studies on the Live e-Learning course – Introduction to Dynamic Analysis.

This is a solid model, fixed at the base.

It is used in full model form and as a half planar symmetry model.

Leave a Reply Cancel reply

Introduction to Dynamics e-Learning course supplement
- Plank Demonstration Example
  - Plank Demonstration Example
  - Plank Input Data in US Units
  - Plank Input Data in Metric Units
  - Plank Model Mode Shapes
- The blunderbuss effect
  - The blunderbuss effect described
- Bracket Structure
  - Description and download files
  - Description of Normal Modes and Natural Frequencies
- Ship Model
  - The ship model description
  - Ship Rigid Body Modes
  - Widget Modes
  - Equivalent Stick Model
  - Geometry File Download US Units
  - Analysis File Download
- Gantry Model
  - The gantry model overview
  - Description and Geometry – Metric Units
  - Description and Geometry – US Units
  - Modeling the Gantry – meshing and idealization
  - Gantry Normal Modes results
  - Transient response of gantry
  - Base motion transient reponse
- Cantilever beam
  - Cantilever beam description
  - Beam dimensions and downloadable files
  - Beam Normal Modes
  - Transient Response showing Modal Coodinates
- Yoke model
  - Yoke model description
  - Yoke model modes – full and half model
- Damping
  - Rayleigh damping exploration

If a Module and its Lessons are grayed out you will need to sign up for Free Membership to access

Sign up here for free membership

Navigate to other courses by returning to the top of this course